CV Grease Tools and Supplies
Search by Keyword

Search by Keyword

IMCO Grease Tools for 930 934 VW style CV

Grease Your CV's in Minutes while on your car.

Grease-N-Go SPACER  Pair for 930 CV's

Grease-N-Go SPACER Pair for 930 CV's

Grease-N-Go SPACER  Pair for 930 CV's
Click to enlarge image(s)
Now you can grease you CV's "WITHOUT REMOVING THEM FROM THE CAR"

A dirty job that once took hours now takes only a few minutes.. and with no mess.


Two spacers with twelve 3/8-24 x 2.50 long 12 point mounting bolts. Enough to do one side of the car.

"Patent Pending"
Grease-N-Go SPACER Pair for 934 CV's with 7/16-20 bolts

Grease-N-Go SPACER Pair for 934 CV's with 7/16-20 bolts

Two spacers with twelve 7/16-20 x 2.75 long 12 point mounting bolts. Enough to do one side of the car.
Grease-N-Go SPACER Pair for 934 CV's with 1/2-20 Bolts

Grease-N-Go SPACER Pair for 934 CV's with 1/2-20 Bolts

Two spacers with twelve 1/2-20 x 2.75 long Socket Head Cap Screw mounting bolts. Enough to do one side of the car.
Grease-N-Go SPACER Pair for Type 2 CV's

Grease-N-Go SPACER Pair for Type 2 CV's

Two spacers with twelve M8-1.25 x 55mm Socket Head Cap Screw mounting bolts. Enough to do one side of the car.
Specifications
Set Screws will ship with the spacers in case your application does not allow enough clearance for the grease fitting to remain on the spacer while the vehicle is driven.
Grease-N-Go Caddy for 930 CV's

Grease-N-Go Caddy for 930 CV's

Grease-N-Go Caddy for 930 CV's
Click to enlarge image(s)
The Grease-N-Go Caddy is a tool that will fully grease a new or freshly cleaned joint prior to installation without getting grease everywhere. Throw the tool in the car with an extra CV in it already greased in case you break a CV out on the trail. The tool will keep the CV clean and ready for action. "Patent Pending"
Grease-N-Go Caddy for 934 CV's

Grease-N-Go Caddy for 934 CV's

Grease-N-Go Caddy for Type 2 CV's

Grease-N-Go Caddy for Type 2 CV's

See Also
Red Line CV-2 Grease w/Moly-14 oz. Tube

Red Line CV-2 Grease w/Moly-14 oz. Tube

Red Line CV-2 Grease w/Moly-14 oz. Tube
Click to enlarge image(s)
Red Line Synthetic CV-2 Grease Designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature stability, extreme- pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100°F to 500°F and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. The exceptional extreme- pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.